Login

APC Easy UPS On-Line 2000VA (1600W) Tower. 230V Input/Output. 4x IEC

Model: SRV2KI

APC Easy UPS On-Line 2000VA (1600W) Tower. 230V Input/Output. 4x IEC C13 Outlets. With Battery Backup. Smart Slot, LCD Graphics Display.

APC Easy UPS On-Line SRV 2000VA 230V

High quality, Double-conversion online UPS designed for essential power protection needs even in the most unstable power conditions.
 
 
FEATURES:
  • Pure static bypass switch without bridging contactor securing a fast and reliable transfer to and from bypass, rated for 125% nominal load.
  • Automatic restart of loads after UPS shutdown
  • Automatically starts up the connected equipment upon the return of utility power.
  • The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • This product has a power factor corrected input side ensuring that the input power factor is always 1 regardless of load and mains voltage. A power factor of 1 minimizes installation costs by allowing the use of smaller cables and smaller fuses.
  • Intelligent battery management
  • The mini slot supports various optional management cards which provide basic or essential monitoring, management and control features for the UPS.
  • LCD graphics display
  • Serial connectivity
  • USB connectivity
  • Provides remote power management of the UPS over the network
  • Customize UPS capabilities with management cards
  • Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.   
  • Pure sine wave output on battery
    Generator compatible
  • Ensures clean, uninterrupted power to protected equipment when generator power is used. 
  • High-efficiency rates that remain stable even at lower operating power levels
    Input Power Factor Correction
  • Double conversion online topology
  • Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process.
  • The battery is only used as a backup source. 
  • The operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
 

 

 

 

 

Subscribe to our newsletter