Capacity		2000VA/1800W
Topology		True online double- conversion,Pure Sine Wave
INPUT
Voltage Range	Low Line Transfer	160Vac / 140Vac / 120 / 110Vac ± 5 % (based on load percentage 100%-80% / 80%-70% / 70%-60% / 60%-0)
	Low Line Comeback	175Vac / 155Vac / 135Vac / 125Vac ± 5 %
	High Line Transfer	300Vac ± 5 %
	High Line Comeback	290Vac ± 5 %
Frequency Range		40Hz - 70Hz
Phase		Single phase with ground
Power Factor Correction		>0.99 @ nominal voltage (100% load)
OUTPUT
Output Power Factor		0.9
Output Voltage (AC Mode)		240Vac (Selectable 200/208/220/230/240Vac)
Voltage Regulation (Batt. Mode)		± 1%
Frequency Range (Batt. Mode)		50Hz or 60Hz ±1Hz
Current Crest Ratio		3:1 (max.)
Transfer	AC Mode to Batt. Mode	Zero
	Inverter to Bypass	4ms (Typical)
Waveform (Batt. Mode)		Pure Sine Wave
EFFICIENCY
ECO Mode (Advanced)		97%
Battery Mode		87%
BATTERY
Battery Number (12 V*9AH)		x 6
Typical Recharge Time		4 hours recover to 90% capacity (for standard model only)
Charging Current (max.)		Standard Models - 1.5Amp. Long Run Models - 1Amp / 2Amp / 4Amp / 6Amp selectable (factory default is 6Amp)
PROTECTION
Full Protection		Overload, discharge, thermal, short circuit and overcharge protection
Surge Protection		984 Joules / 22000 Amps
COMMUNICATIONS AND MANAGMENT
Interface		USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software		PowerShield® NetGuard® software - supports Windows, Linux, Unix and Mac based operating systems
LCD Display/Alarm		UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
Audible Alarm		Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
PHYSICAL
Dimension, (D x W x H) mm		600 x 438 x 88
Weight (kg)		26.8 & 10.5
OPERATING ENVIRONMENT
Temperature		0 - 40°C
Humidity		20 - 90% (RH Non-condensing)
Noise Level		< 50dBA @ 1 Meter
COMPLIANCE
Safety / EMC / RoHS		EN62040-1-1 2003, IEC60950-1-1 / EN62040-2 2006 / Directive 2011/65/EU