Capacity | 2000VA/1800W |
Topology | True online double- conversion, Pure Sine Wave |
Input | |
Voltage Range |
Low Line Transfer: 160Vac/140Vac/120/110Vac ±5% (based on load percentage 100%-80%/80%-70%/70%-60%/60%-0) Low Line Comeback: 175Vac/155Vac/135Vac/125Vac ±5 % High Line Transfer: 300Vac ±5 % High Line Comeback: 290Vac ±5 % |
Frequency Range | 40Hz - 70Hz |
Phase | Single-phase with ground |
Power Factor Correction | ≤0.99 @ nominal voltage (100% load) |
Output | |
Output Power Factor | 0.9 |
Output Voltage (AC Mode) | 240Vac (Selectable 200/208/220/230/240Vac) |
Voltage Regulation (Batt. Mode) | ±1% |
Frequency Range (Batt. Mode) | 50Hz or 60Hz ±1Hz |
Current Crest Ratio | 3:1 (max.) |
Transfer |
AC Mode to Batt. Mode: 0 |
Waveform (Batt. Mode) |
Pure Sine Wave |
Efficiency | |
ECO Mode (Advanced) | 97% |
Battery Mode | 87% |
Battery | |
Battery Number (12 V*9AH) | x4 |
Typical Recharge Time | 4 hours recover to 90% capacity (for standard model only) |
Charging Current (max.) | Standard Models - 1.5Amp. Long Run Models - 1Amp/2Amp/4Amp/6Amp selectable (factory default is 6Amp) |
Protection | |
Full Protection | Overload, discharge, thermal, short circuit and overcharge protection |
Surge Protection | 984 Joules/22000 Amps |
Communications and Management | |
Interface | USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
Software | PowerShield® NetGuard® software - supports Windows, Linux, Unix and Mac-based operating systems |
LCD Display/Alarm | UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators |
Audible Alarm | Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload |
Physical | |
Dimension, (D x W x H) mm | 500 x 438 x 88 |
Weight (kg) | 19.5 |
Operating Environment | |
Temperature | 0°C ~ 40°C |
Humidity | 20% ~ 90% (RH Non-condensing) |
Noise Level | <50dBA@1m |
Compliance | |
Safety/EMC/RoHS | EN62040-1-1 2003, IEC60950-1-1/EN62040-2 2006/Directive 2011/65/EU |