| Capacity | 2000VA/1800W |
| Topology | Line Interactive, Pure Sine Wave |
| Input | |
| Voltage | 240Vac (Nominal) |
| Voltage Range | 162-290V ac |
| Frequency Range | 50/60Hz (Auto-sensing) ±5Hz |
| Output | |
| Output Voltage (AC Mode) | 240V ac (Selectable 208/220/230Vac) ±10% AVR |
| Voltage Regulation (Batt. Mode) | ±3% |
| Frequency Range (Batt. Mode) | 50Hz or 60Hz ±1Hz |
| Current Crest Ratio | 3:1 |
| Transfer Time | 6ms (Typical) |
| Waveform (Batt. Mode) | Pure Sine Wave |
| Efficiency | |
| ECO Mode (Advanced) | 98% |
| Battery Mode | 89% |
| Battery | |
| Standard Model | Battery Type & Number: 12V x 9AH (x 4) Typical Recharge Time: 4 hours to recover to 90% capacity |
| Additional Battery Banks | PSRTBB8 (x1) |
| Protection | |
| Full Protection | Overload, discharge, thermal, short circuit and overcharge protection |
| Surge Protection | 1560J/32500A |
| Communications & Management | |
| Interface | USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
| Software | PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix and Mac |
| LCD Display/Alarm | AC Mode, Batt.Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Low Batt, Batt.Time Remaining |
| Audible Alarm | Battery Mode, Low Battery (Batt. Mode), Fault, Overload |
| Physical | |
| Dimension (D x W x H) | 480 x 438 x 88mm |
| Weight (Net/Gross) | (23kg/25kg) |
| Operating Environment | |
| Temperature | 0 - 40°C |
| Humidity | 0 - 90% (RH Non-condensing) |
| Noise Level | <45dB |
| Compliance | |
| Safety | EN62040-1-1 2003, IEC60950-1-1 |
| EMC | EN62040-2 2006 |
| RoHS | Directive 2011/65/EU |