PSCERT1000L			RT BATTERY BANKS: PSRTBB12
Capacity		1000VA/900W
Topology		True online double- conversion, Pure Sine Wave
INPUT
Voltage Range	Low Line Transfer	160V/140V/120V/110V AC ±5% (based on load percentage 100%-80%/80%-70%/70%-60%/60%-0)
	Low Line Comeback	175V/155V/135V/25V AC ±5%
	High Line Transfer	300V AC ±5%
	High Line Comeback	290V AC ±5%
Frequency Range		40Hz ~ 70Hz
Phase		Single phase with ground
Power Factor Correction		≥0.99 @ nominal voltage (100% load)
OUTPUT
Output Power Factor		0.9
Output Voltage (AC Mode)		240V AC (Selectable 200/208/220/230/240V AC)
Voltage Regulation (Batt. Mode)		± 1%
Frequency Range (Batt. Mode)		50Hz or 60Hz ±1Hz
Current Crest Ratio		3:1 (max.)
Transfer	AC Mode to Batt. Mode	4ms (Typical)
	Inverter to Bypass	Pure Sine Wave
EFFICIENCY
ECO Mode (Advanced)		96%
Battery Mode		86%
BATTERY
Battery Number (12Vx9AH)		x 3
Typical Recharge Time		4 hours recover to 90% capacity (for the standard model only)
Charging Current (max.)		Standard Models - 1.5Amp. Long Run Models - 1Amp/2Amp/4Amp/6Amp selectable (factory default is 6Amp)
PROTECTION
Full Protection		Overload, discharge, thermal, short circuit and overcharge protection
Surge Protection		984 Joules/22000A
COMMUNICATIONS AND MANAGEMENT
Interface		USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software		PowerShield® NetGuard® software - supports Windows-based operating systems, Linux, Unix and Mac
LCD Display/Alarm		UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
Audible Alarm		Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
PHYSICAL
Dimension, (D x W x H)		380 x 438 x 88mm	480 x 438 x 88mm
Weight		8.4kg	22kg
OPERATING ENVIRONMENT
Temperature		0°C ~ 40°C
Humidity		20% ~ 90% (RH Non-condensing)
COMPLIANCE
Safety/EMC/RoHS		EN62040-1-1 2003, IEC60950-1-1/EN62040-2 2006/Directive 2011/65/EU