| IEEE Standard | IEEE 802.3 10Base-T Ethernet | |
| IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet | ||
| IEEE 802.3x Flow Control and Back Pressure | ||
| IEEE 802.3z 1000Base-X Gbit/s Ethernet over Fiber- Optic | ||
| Switch Architecture | Back-plane (Switching Fabric) : | |
| 1.2Gbps(IFS-402F) | ||
| 1.6Gbps (IFS-800) | ||
| 5.6Gbps (IFS-802GS) | ||
| Full wire-speed | ||
| Data Processing | Store and Forward | |
| Transfer Rate | 14,880pps for Ethernet port | |
| 148,800pps for Fast Ethernet port | ||
| 1,488,000pps for Giga Ethernet port | ||
| Flow Control | IEEE 802.3x flow control, back pressure flow control | |
| Provides Broadcast Storm Protection | Present, Enable /Disable set by DIP SW ( IFS-800) | |
| MAC Address Table | 2K (FS-800) | |
| Packet Buffer Size | 448Kbit (IFS-800) | |
| Network Connector | 4X RJ-45, 2 Fiber (IFS-402F) | |
| 8x RJ-45 (IFS-800) | ||
| 8x RJ-45, 2 SFP (IFS-802GS) | ||
| RJ-45 Port: | Auto MDI/MDI-X function, 10/100Base-TX | |
| Auto negotiation speed, Full/Half duplex | ||
| Fiber Port : 100Base-FX SC/ST, Multi/Single Mode | ||
| SFP Port : 1000Base-X | ||
| Network Cable | 10Base-T: 2-pair UTP/STP Cat. 5 cable | |
| EIA/TIA-568 100-ohm (100m) | ||
| 100Base-TX: 2-pair UTP/STP Cat. 5 cable | ||
| EIA/TIA-568 100-ohm (100m) | ||
| Fiber Cable (Multi-mode): 50/125um~62.5/125um | ||
| Fiber Cable (Single-mode): 8/125um~10/125um | ||
| Wavelength: 1310nm (Multi-mode/Single-mode) | ||
| Available distance: | 2KM (Multi-Mode) | |
| 30KM (Single-Mode) | ||
| 50KM (Single Mode ) | ||
| SFP: Distance depend on SFP Fiber Transceiver | ||
| Protocol | CSMA/CD | |
| LED | Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber) | |
| RJ-45 Per port: Link/Active (Green), Speed 100 (Yellow) | ||
| DIP SW | DIP 1 | OFF : Enable power failure alarm |
| ON : Disable | ||
| DIP 2 | OFF : Enable broadcast storm protection | |
| ON : Disables broadcast storm protection | ||
| Reverse Polarity Protection | Present | |
| Overload Current Protection | Present | |
| Power Supply | Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block ) | |
| Provides DC Power JACK adapter cable for external power supply | ||
| Power Consumption | 3.9W (IFS-800) | |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDC, NC | |
| Removable Terminal Block | Provides 2 Redundant power, Alarm relay contact, 6 Pin | |
| Operating Temperature | -10 ~ 60°C (IIFS-800) | |
| -40 ~ 75°C (IIFS-800-E | ||
| Operating Humidity | 5% to 95% (Non-condensing) | |
| Storage Temperature | -40 ~ 85°C | |
| Housing | Rugged Metal, IP30 Protection and Fanless | |
| Dimensions | 1 106 x 31.6 x 142mm (D x W x H) (IFS-800) | |
| Weight | 0.43kg (IFS-800) | |
| Installation Mounting | DIN Rail mounting or wall mounting | |
| MTBF | 552,587Hrs (IFS-800) (MIL-HDBK-217) | |
| Warranty | 5 years | |
| Certification | ||
| EMC/EMS | CE | |
| EMI (Electromagnetic Interference) | FCC Part 15 Subpart B Class A,CE EN55022 Class A | |
| Railway Traffic | EN50121-4 | |
| Immunity for Heavy Industrial Environment | EN61000-6-2 | |
| Emission for Heavy Industrial Environment | EN61000-6-4 | |
| EMS | EN61000-4-2 (ESD) Level 3, Criteria B | |
| EN61000-4-3 (RS) Level 3, Criteria A | ||
| EN61000-4-4 (Burst) Level 3, Criteria A | ||
| EN61000-4-5 (Surge) Level 3, Criteria B | ||
| EN61000-4-6 (CS) Level 3, Criteria A | ||
| EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A | ||
| Safety | UL60950-1 (Pending) | |
| Shock | IEC 60068-2-27 | |
| Freefall | IEC 60068-2-32 | |
| Vibration | IEC 60068-2-6 | |