Specifications | ||
Standard | IEEE 802.3 | 10Base-T 10Mbit/s Ethernet |
IEEE 802.3u | 100Base-TX, 100Base-FX, Fast Ethernet | |
IEEE 802.3z | 1000Base-X Gbit/s Ethernet over Fiber-Optic | |
IEEE 802.1d | STP (Spanning Tree Protocol) | |
IEEE 802.1w | RSTP (Rapid Spanning Tree Protocol) | |
IEEE 802.1s | MSTP (Multiple Spanning Tree Protocol) | |
ITU-T G.8032 / Y.1344 | ERPS (Ethernet Ring Protection Switching) | |
IEEE 802.1Q | Virtual LANs (VLAN) | |
IEEE 802.1X | Port-based and MAC based Network Access Control, Authentication | |
IEEE802.3ac | Max frame size extended to 1522Bytes | |
IEEE 802.3ad | Link aggregation for parallel links with LACP(Link Aggregation Control Protocol) | |
IEEE 802.3x | Flow control for Full Duplex | |
IEEE 802.1ad | Stacked VLANs, Q-in-Q | |
IEEE 802.1p | LAN Layer 2 QoS/CoS Protocol for Traffic Prioritization | |
IEEE 802.1ab | Link Layer Discovery Protocol (LLDP) | |
IEEE 802.3az | EEE (Energy Efficient Ethernet) | |
VLAN ID | 4094 IEEE802.1Q VLAN VID | |
Switch Architecture | Back-plane (Switch Fabric): 11.2Gbps Full Wire-Speed | |
Data Processing | Store and Forward | |
Flow Control | IEEE 802.3x for full duplex mode Back pressure for half duplex mode | |
Network Connector | 16x 10/100Base-TX RJ-45 + 4x 100/1000Base-X SFP connector RJ-45 UTP port support Auto-negotiation speed, Auto MDI/MDI-X function, SFP port support dual speed with DDMI |
|
Console | RS-232 (RJ-45) | |
Network Cable | UTP/STP above Cat. 5e cable | |
EIA/TIA-568 100-ohm (100m) | ||
Protocols | CSMA/CD | |
Reverse Polarity Protection | Present | |
Overload Current Protection | Present | |
CPU Watch Dog | Present | |
Power Supply | Redundant Dual DC 12/24/48V (9.6~60VDC) Input power (Removable Terminal Block ) | |
Provide DC Power JACK adapter cable for external power supply | ||
Power Consumption | Input Voltage 12VDC: 10.8W Input Voltage 24VDC: 10.6W Input Voltage 48VDC: 12.5W |
|
LED | Per unit: Power 1 (Green), Power 2 (Green), Fault (Amber), CPU Act (Green), Ring Master (Yellow) | |
Per RJ-45 port: 10/100 Link/Active (Green) | ||
SFP Fiber Per port: Link/Active (Green) | ||
Jumbo Frame | 9.6KB | |
IEEE802.3ac | Max frame size extended to 1522Bytes (allow Q-tag in packet) | |
MAC Address Table | 8K | |
Memory Buffer | 512K Bytes for Packet Buffer | |
Warning Message | System Syslog, SMTP/ e-mail event message, alarm relay | |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDC | |
Removable Terminal Block | Provide 2 redundant power, alarm relay contact, 6 Pin | |
Operating Temperature | -10 ~ 60°C | |
Operating Humidity | 5% to 95% (Non-condensing) | |
Storage Temperature | -40 ~ 85°C | |
Housing | Rugged Metal, IP30 Protection, Fanless | |
Dimensions | 106 x 72 x152 mm (D x W x H) | |
Weight | 0.82kg | |
Installation Mounting | DIN Rail mounting or wall mounting | |
MTBF | 145,967hrs (MIL-HDBK-217) | |
Warranty | 5 Years | |
Certification | ||
EMC | CE | |
EMI (Electromagnetic Interference) | FCC Part 15 Subpart B Class A,CE EN55022 Class A | |
Railway Traffic | EN50121-4 | |
Immunity for Heavy Industrial Environment | EN61000-6-2 | |
Emission for Heavy Industrial Environment | EN61000-6-4 | |
EMS (Electromagnetic Susceptibility) Protection Level | EN61000-4-2 (ESD) Level 3, Criteria B | |
EN61000-4-3 (RS) Level 3, Criteria A | ||
EN61000-4-4 (Burst) Level 3, Criteria A | ||
EN61000-4-5 (Surge) Level 3, Criteria B | ||
EN61000-4-6 (CS) Level 3, Criteria A | ||
EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A | ||
Safety | UL60950-1 | |
Shock | IEC 60068-2-27 | |
Freefall | IEC 60068-2-32 | |
Vibration | IEC 60068-2-6 |