IEEE Standard	IEEE 802.3 10Base-T Ethernet
	IEEE 802.3u 100Base-TX Fast Ethernet
	IEEE 802.3ab 1000Base-T Gigabit Ethernet
	IEEE 802.3at, IEEE802.3af
PoE Standard	IEEE802.3at, IEEE802,3af
PoE RJ-45 Pin Assignment	RJ-45 support IEEE 802.3at/af Middle-Span Alternative B mode or End-Span Alternative A mode, set by DIP SW
	End-Span, Alternative A mode Positive (V+): RJ-45 pin 1, 2. Negative (V-): RJ-45 pin 3, 6. Data (1, 2, 3, 6, 4, 5, 7, 8 )
	Middle-Span, Alternative B mode Positive (V+): RJ-45 pin 4,5 Negative (V-): RJ-45 pin 7,8 Data (1, 2, 3, 6, 4, 5, 7, 8 )
Network Connector	1 RJ-45 for 10/100/1000Base-T Data, and 1 RJ-45 for 10/100/1000Base-T Data with PoE Output power
Network Cable	UTP/STP above Cat. 5e cable
	EIA/TIA-568 100-ohm (100m)
LED Per unit: Power (Green)	Alt A/PoE ,Alt B/PoE (Green)
	ON	when a PD device is connected to the GbE+PoE RJ-45 connector and the Injector is feeding power in Alt A or B mode.
	Blinking	One of the Injector faults (overload, short circuit or over-temperature) occurs.
DIP SW	SW1	ON	Alternative B mode PoE Power Pin 4, 5, 7, 8 (When DIP SW 3 Off)
		OFF	Alternative A mode PoE Power Pin 1, 2, 3, 6 (When DIP SW 3 Off)
	SW2	ON	Hi Power 36W 36W PoE output
		OFF	Standard PoE 802.3af (15.4W), 802.3at (30W)
	SW3	ON	4 Pair PoE Pin Ultra-High Power 60W PoE Output
		OFF	2 Pair PoE Pin depand on DIP SW 1,2
	SW4	60W	PD handshake mode
		ON	General PD at ether 2 or 4 pairs mode
		OFF	Compatible with some particular PD devices at high power mode (4 Pair mode),such as AXIS® Q60
Reserve Polarity Protection	Present
Overload Current Protection	Present
Power Supply	(44~57VDC) Input power (Removable Terminal Block )
PoE Power Output	Maximum Ultra High Power 60W, IEEE802.3at 30W, IEEE802.3at High power 36W, IEEE802.3af 15.4W
Power Consumption		In 30W mode (2 Pairs)	In 60W mode (4 Pairs)
	Input Power Consumption (Input 48VDC)	31.1W	62.8W
	PoE Output Power	30W	60W
Removable Terminal Block	Provides 2 Pin for power input connectorn
Operating Temperature	-10 ~ 60°C (INJ-IG01-PH)
	-40 ~ 75°C (INJ-IG01-PHE)
Operating Humidity	5% to 95% (Non-condensing)
Storage Temperature	-40 ~ 85°C
Housing	Rugged Metal, IP30 Protection and fanless
Dimensions	70 x 30 x 103 mm (D x W x H)
Weight	215g
Installation Mounting	DIN Rail mounting, and Wall Mounting (Optional)
MTBF	409,994Hours (MIL-HDBK-217)
Warranty	5 years
Certification
EMC	CE
EMI	FCC Part 15 Subpart B Class A, CE EN55022 Class A
Immunity for Heavy Industrial environment	EN 61000-6-2
Emission for Heavy industrial environment	EN 61000-6-4
EMS	EN61000-4-2 (ESD) Level 3, Criteria B
	EN61000-4-3 (RS) Level 3, Criteria A
	EN61000-4-4 (EFT) Level 3, Criteria A
	EN 61000-4-5 (Surge) Level 3, Criteria B
	EN 61000-4-6 (CS) Level 3, Criteria A
	EN61000-4-8 (PFMF) Field strength 300A/m Criteria A
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6