INPUT
Voltage Range	Low Line Transfer	160Vac / 140Vac / 120Vac / 110Vac ± 5% (based on load percentage 100% - 80% / 80% - 70% / 70% - 60% / 60% - 0)
	Low Line Comeback	170Vac / 150Vac / 130Vac / 120Vac ± 5%
	High Line Transfer	300Vac ± 5%
	High Line Comeback	290Vac ± 5%
Frequency Range		40Hz - 70Hz
Phase		Single phase with ground
Power Factor Correction		>0.99 @ nominal voltage (100% load)
OUTPUT		Output Power Factor: 0.9
Output Voltage (AC Mode)		240Vac (Selectable 208/220/230/240Vac)
Voltage Regulation (Bat. Mode)		±1%
Frequency Range (Batt. Mode)		50Hz or 60Hz ±1Hz
Current Crest Ratio		5:1 (max.)
Transfer Time		4ms (Typical)
EFFICIENCY
ECO Mode (Advanced)		98%
Battery Mode		86%
BATTERY
Battery Type & Number		12 V*9AH (x3)
Typical Recharge Time		4 hours recover to 90% capacity
Charging Current (max.)		Standard Model -1.5Amp, Long Run Model - 1Amp/2Amp /4Amp/6Amp (factory default is 6Amp)
PROTECTION
Full Protection		Overload, discharge, thermal, short circuit and overcharge protection
Surge Protection		984 Joules / 22000 Amps
COMMUNICATIONS & MANAGEMENT
Interface		USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software		PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix and Mac
LCD Display/Alarm		UPS Status, Load & Battery Level, Input/Output Voltage, Batt. Time Remaining and Fault Indicators
Audible Alarm		Battery Mode, Bypass Mode, Low Battery (Batt. Mode), Fault, Overload
PHYSICAL
Dimension (D x W x H)		480 x 438 x 88 mm
Weight		18kg
OPERATING ENVIRONMENT
Temperature		0 - 40°C
Humidity		20 - 90% (RH Non-condensing)
Noise Level		< 50dBA @ 1 Meter
COMPLIANCE
Safety		EN62040-1-1 2003, IEC60950-1-1
EMC		EN62040-2 2006
RoHS		Directive 2011/65/EU