INPUT
|
| Voltage |
240Vac (Nominal) |
| Voltage Range |
162-290V ac |
| Frequency Range |
50/60Hz ±5Hz (Auto-sensing) ±5Hz |
OUTPUT
|
| Output Voltage (AC Mode) |
240Vac (Selectable 208/220/230VAC) ±10% AVR |
| Voltage Regulation (Batt. Mode) |
±3% |
| Frequency Range (Batt. Mode) |
50Hz or 60Hz ± 1Hz |
| Current Crest Ratio |
3:1 |
| Transfer Time |
6ms (Typical) |
| Waveform (Batt. Mode) |
Pure Sine Wave |
EFFICIENCY
|
| ECO Mode (Advanced) |
98% |
| Battery Mode |
83% |
BATTERY
|
| Standard Mode |
Battery Type & Number |
12Vx9AH (x2) |
| Typical Recharge Time |
4 hours recover to 90% capacity |
| Additional Battery Banks |
N/A |
PROTECTION
|
| Full Protection |
Overload, discharge, thermal, short circuit and overcharge protection |
| Surge Protection |
1560 Joules/32500 Amps |
COMMUNICATIONS & MANAGEMENT
|
| Interface |
USB or RS232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
| Software |
PowerShield NetGuard® software - supports Windows based operating systems, Linux, Unix and Mac |
| LCD Display/Alarm |
AC Mode, Batt.Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Low Batt, Batt.Time Remaining |
| Audible Alarm |
Battery Mode, Low Battery (Batt. Mode), Fault, Overload |
PHYSICAL
|
| Dimension (D x W x H) |
380 x 438 x 88mm |
| Weight (Net/Gross) |
15kg/16kg |
OPERATING ENVIRONMENT
|
| Temperature |
0 - 40°C |
| Humidity |
0 - 90% (RH Non-condensing) |
| Noise Level |
<45dB |
COMPLIANCE
|
| Safety |
EN62040-1-1 2003, IEC60950-1-1 |
| EMC |
EN62040-2 2006 |
| RoHS |
Directive 2011/65/EU |